Fiberglass Yarn

E glass Roving for spray up,Spray Up Process

Model Number: EW410A
Technique: Spray Up Roving
Linear density: 2400TEX/3000TEX
Product description:
INQUIRY

Spray Up Process

The fiberglass roving are cut by the chopper and sprayed with the resin onto the mold.Through rolling by hand is necessary to eliminate air bubbles.And in the end the glass-resin mixture are cured into prducts.

E Glass Roving for Spray up

The products are designed to use reinforcing silane size and provide excellent choppability,anti-static,excellent dispersion,fast wet-out,no spring back at the small angle,high intensity product.

Products Code	Filament Diameter (um)	Linear Density (TEX)	Compatible Resin	Product Features and Application
EW410A	12	2400、3000	UP VE	Fast wet-out Low Static Good Choppability Minor Angle No Spring Back Mainly Used for producing Boat,Bath Tub,Autombile Parts,Specially suitable for making Large flat plane product
EW401	12	2400、3000	UP VE	Moderate wet out Low fuzz Good choppability No spring back in small angle Mainly ne used to make the tub-shower,tank,boat plaster pamel

Unless otherwise specified, the fiberglass products should be in dry, cool and moisture-proof area. The room temperature and humidity should be always maintained at 15℃~35℃ and 35%~65%. It is best if the price is used within 12 months after production date. The fiberglass products should remain in their original packaging until just prior to user. To ensure safety and avoid damage to the product, the pallets not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, special care should be taken to correctly and smoothly move the top pallet.