导航菜单
Search
Search:
Advertisement
文章正文
A way to use fiberglass fabric for vehicle repairs
Writer:admin    Released:2017-03-31 10:37:23    Type:【L】【M】【S

When you have to make a restore at the bodywork of your car, you could use fiberglass material to restoration many one of a kind regions. Fiberglass cloth, well applied and hardened, will leave the body prepared to paint so it seems as proper as new. Even though body paintings can seem complicated and intimidating, it is certainly pretty easy. It takes a little patience and it could be slightly messy, but you will find you can easily make a restore in your car frame the usage of fiberglass cloth.

 

Step 1 - getting ready the surface

You can not start using the fiberglass fabric till you’ve organized the floor to simply accept it. Start by way of the use of coarse-grain sandpaper on the whole area on and across the repair. The floor must be scuffed until it’s easy to touch and dull.

 

Now, take a rag and acetone and clean the vicinity you’ve just sanded. This gets rid of dust as well as oil and grease. If there are any strains of those, the fiberglass will not bond to the floor as it will delaminate.

 

Step 2 - cut the fabric

The usage of the application knife, cut one layer of the fiberglass material to the size of the place wanting to be repaired. You’ll need to reduce a number of other layers, each one smaller than the ultimate, till you've got enough layers to fill the area being repaired. Stack them to make a mat of fiberglass material and put apart for a few minutes.

 

Step 3 - blending the resin

To mix the resin, pour it right into a bucket in conjunction with the hardener. Use the proportions indicated at the bins. Put on a pair of latex gloves before operating with the resin mix, then stir the mix very thoroughly until you obtain a clean consistency. Take the felt curler, dip it lightly within the resin combination and roll it lightly over the repair location to depart a totally light coating.

 

Step 4 - apply the material

Now soak your smallest piece of the fiberglass fabric within the resin combination till it’s taken on the shade of the resin aggregate with in reality no white regions displaying. Follow this piece to the damaged location. Take the air roller and roll over the piece of fiberglass cloth till there are no air bubbles.

 

You want to copy this technique with each barely larger piece of material, setting one on top of the closing. Roll every one till no air bubbles remain. You’ll finish with the most important piece of fiberglass material. Roll over this tough with the air roller. There’s no want to wipe off the excess resin.

 

Now leave the fiberglass cloth to cure, at the least in a single day. Wait till it hardens completely and feels cool against your hands.

 

Step five – sanding

 

Start by using the usage of a exceptional-grit sandpaper at the fiberglass fabric restore. Sand gently then follow up through using a palm sander. You need to preserve sanding till the fiberglass location is smooth. It ought to be degree with the region surrounding it, at which point it'll be prepared to be prepared, primed and painted.

FEEDBACK
Name:
Phone:
Mail:
Company:
Content:
Address:
 
CONTACT US
Salse:Fred Wei
Skype: fred.wei08
Tel:+86-0832-8242208
Fax:+86-0832-8241969
Email:fred@chinaweibo.com.cn
Address:Group 3, Weijia, Yanling Town, Weiyuan County, Sichuan

TEL:+86-18602883091 +86-0832-8242208 FAX:+86-0832-8241969 Email:fred@chinaweibo.com.cn

Address:Webo Industrial Park, Yanling Town, Weiyuan Country, Sichuan, China

Sichuan Sincere&Long-term Complex Material Co., Ltd Copyright(C)2009-2016

fiberglass chopped strand mat

Online Service