导航菜单
Search
Search:
Advertisement
文章正文
FRP water tank quality assurance technology
Writer:admin    Released:2018-06-30 09:07:20    Type:【L】【M】【S
SMC combined water tank is composed of SMC modular veneer, sealing material, metal structural parts and piping system, which can be assembled from 1-500m3 water tank according to the needs of users.If the original water tank needs to be replaced, there is no need to change the house, and the door can be installed with strong adaptability, bringing great convenience to the design and construction.The production of water tank has strict technical requirements
1.The SMC FRP cistern must be manufactured strictly in accordance with the requirements and dimensions on the drawing.
2.After the completion of the welding of the SMC fiberglass tank, the fasteners should not be loose, and there should be no leakage welding or missing parts in the connecting parts.
3.SMC FRP tank weld to the full, if not full might leak, glass fiber reinforced plastic water tank welding outer surface is smooth and beautiful without slag, no flash, no pores, no cracks, welding interface part of the break, separation is best not to appear sunken, weld can't cut the hand.The liner weld of vitreous steel cistern should undertake polishing processing, such ability won't cut a hand.
4.The flat bottom plate of SMC FRP tank should be kept smooth, and the flat bottom plate should not have slag inclusion and stomatal weld tumors.
5.The top of the SMC fiberglass tank and the welds in the holes and other places must be fully welded.
6.The welding of SMC FRP tank joint must be vertical and the inclination should not be greater than 1 degree.
7.SMC fiberglass water tank insulation layer and the outside of the tank to be firm, look flat.The insulation layer of vitreous steel cistern had better be made with polyurethane foaming plastic for the raw material, the surface cannot bump uneven also cannot have the sign of scratch mark or rust.
8.The size tolerance of the SMC FRP tank shall not exceed 3 cm.
9.After filling the water in the SMC FRP tank, there should be no water seepage or water leakage, nor should there be obvious deformation.
10. The water tank seal is a specially designed product seal with non-toxic, water-resistant, elastic and small permanent deformation, with a service life of more than 30 years.

FEEDBACK
Name:
Phone:
Mail:
Company:
Content:
Address:
 
CONTACT US
Salse:Fred Wei
Skype: fred.wei08
Tel:+86-0832-8242208
Fax:+86-0832-8241969
Email:fred@chinaweibo.com.cn
Address:Group 3, Weijia, Yanling Town, Weiyuan County, Sichuan

TEL:+86-18602883091 +86-0832-8242208 FAX:+86-0832-8241969 Email:fred@chinaweibo.com.cn

Address:Webo Industrial Park, Yanling Town, Weiyuan Country, Sichuan, China

Sichuan Sincere&Long-term Complex Material Co., Ltd Copyright(C)2009-2016

fiberglass chopped strand mat

Online Service